Açıklama

Natro Therm adhesive for thermal insulating boards is an adhesive mortar that is used for bonding thermal insulating boards, consisting of granulometric silica, Portland cement, chemical additives that improve adhesion, flexibility, resistance to water, and resistance to extreme cold and heat.

Natro Therm adhesive for thermal insulating boards is used for bonding thermal insulating boards.

The surface must be cleaned of oil, dust, paint, etc. that reduce the adherence. Surfaces that are very dry and have high water absorbency should be moistened before application or should be coated with acrylic primer to reduce the water absorbency.

The application environment temperature should be between +5 and +35°C. The surface of the application needs to be protected from excessive winds and drafts.

• Do not apply in frozen environments or surfaces that are being thawed.

Initial Strength (N / mm²): > 7
Bending Strength (N / mm²): > 7
Tensile Strength (N / mm²): > 3
Adhesion Strength (N / mm²): > 0.7
Water Absorption (g): 240 min, maximum 10 g
Elect Analysis: 1 mm sieve, remaining %0 (max.)

Applicable Standard: TS EN 13556