A construction chemical that complies with TS EN 12004 and consists of granulometric aggregate, Portland cement, and chemical additives that increase adhesion, flexibility, resistance to water, and resistance to extreme cold and heat. It is used for laying ceramics, tiles and similar coating materials on the walls and floors in indoor and outdoor areas. The […]
A construction chemical that complies with TS EN 12004 and consists of granulometric aggregate, Portland cement, and chemical additives that increase adhesion, flexibility, resistance to water, and resistance to extreme cold and heat. It is used for laying ceramics, tiles and similar coating materials on the walls and floors in indoor and outdoor areas.
The surface must be cleaned of oil, dust, paint, etc. that may reduce the adherence. Surfaces that are very dry and have high water absorbency should be moistened before application to reduce the water absorbency. Temperature of the application environment should range from +5 to +35°C. The surface of application needs to be protected from excessive wind and draft.
Initial Tensile Adhesive Strength: > 0.5 N / mm²
Tensile Adhesive Strength after Immersion in Water: > 0.5 N / mm²
Tensile Adhesive Strength after Thermal Aging: > 0.5 N / mm²
Tensile Adhesive Strength after Freeze-Thaw Cycle: > 0.5 N / mm²
Tensile Adhesive Strength after Exposed Holding Time: > 0.5 N / mm²
Fire Class: A1
Applicable Standard: TS EN 12004:2007+A1:2013
