Natro Plast is a fiber-reinforced cement-based plastering material that is used for plastering thermal insulating boards with adhesion, flexibility, resistance to water and resistance to extreme cold and heat improved by specific chemicals. Natro Plast is used for plastering any thermal insulating boards for sheathing of interior and exterior facades. The surface must be cleaned […]
Natro Plast is a fiber-reinforced cement-based plastering material that is used for plastering thermal insulating boards with adhesion, flexibility, resistance to water and resistance to extreme cold and heat improved by specific chemicals.
Natro Plast is used for plastering any thermal insulating boards for sheathing of interior and exterior facades.
The surface must be cleaned of oil, dust, paint, etc. that reduce the adherence.
Surfaces that are very dry and have high water absorbency should be moistened before application or should be coated with acrylic primer to reduce the water absorbency.
Temperature of application environment should range from +5 to +35°C.
The surface of the application needs to be protected from excessive wind and draft.
No application is recommended for frozen surfaces, or surfaces that are likely to freeze in 1 day, or surfaces that are being thawed.
Compressive Strength (N / mm²): > 6,0
Bending Strength (N / mm²): > 2,0
Adhesion to Thermal Ins. Boards (N / mm²): > 0,08
Coefficient of water vapor permeability: < 15
Sieve Analysis: Residue on 1 mm sieve: 0%
Applicable Standard: TS 13687
