Natro Deco

NatroDeco; It is a cement-based interior and exterior topcoat surface coating that creates a natural texture on the surface, reinforced with special chemicals that increase resistance to extreme hot and cold and water resistance. It can be applied on polystyrene or rockwool thermal insulation systems, on surfaces such as thin plaster and rough plaster. Surface […]

Açıklama

NatroDeco; It is a cement-based interior and exterior topcoat surface coating that creates a natural texture on the surface, reinforced with special chemicals that increase resistance to extreme hot and cold and water resistance. It can be applied on polystyrene or rockwool thermal insulation systems, on surfaces such as thin plaster and rough plaster. Surface adherence-reducing substances such as oil, dust, etc.
must be purified. At least 48 hours must have passed after the application of thermal insulation plaster. Prime must be applied to the surface before applying Natro deco. On surfaces with high water absorbency and pores (such as aerated concrete), the surface should be plastered with thermal insulation plaster at a minimum thickness of 3 mm before Natro deco application. In direct sunlight, excessive drafts
Application should not be made in environments with heavy rain.

The temperature of the application environment is between +5 and
It should be within +35 °C.
Brightness: G3
Dry Film Thickness: E5
Grain Size: S4
Water Vapor Transfer Rate: V1
Water Transfer Rate: W1
Crack Covering: Ao
Carbon Dioxide Permeability: Co
Drying Time: Surface dry
24 hours full drying 3 days
Reaction to Fire: Class A1
Relevant Standard: TS 7847