Fiber-reinforced cement-based mortar and adhesive material that is used for plastering and bonding the polystyrene thermal insulating boards with adhesion, flexibility, resistance to water improved by specific chemicals. It is used for plastering and bonding any thermal insulating boards for sheathing of interior and exterior facades. The surface must be cleaned of oil, dust, paint, […]
Fiber-reinforced cement-based mortar and adhesive material that is used for plastering and bonding the polystyrene thermal insulating boards with adhesion, flexibility, resistance to water improved by specific chemicals.
It is used for plastering and bonding any thermal insulating boards for sheathing of interior and exterior facades.
The surface must be cleaned of oil, dust, paint, etc. that reduce the adherence. Surfaces that are very dry and have high water absorbency should be moistened before application to reduce the water absorbency. Temperature of the application environment should range from +5 to +35°C. The surface of application needs to be protected from excessive wind and draft.
Compressive Strength (N / mm²): >7,0
Bending Strength (N / mm²): >3,0
Adhesion Strength (N / mm²): >0,7
Coefficient of water vapor permeability: < 15
Sieve Analysis: on 1 mm sieve: 0%
Water Absorption: 30 minutes maximum 5g
240 minutes maximum 10g
Reaction to Fire: Class A1
Applicable Standard: TS EN 13556 – TS13687
